Fitoverm - instructions for use for indoor plants, roses, orchids and violets

Hello! I had a period in my life when I became a real fan of indoor plants.

They were everywhere with me. Now imagine the scale of the problem when they were exposed to pests! My friend advised me Fitoverm, although I always thought that it was intended only for the garden.

In fact, in practice, the tool helped me a lot. I want to tell you now in detail about Fitoverm and instructions for its use for indoor plants. You will find all the most important in the article below.

The drug Fitoverm - a sure remedy for many pests

If you are looking for a product that is safe for the environment and effective for combating harmful insects - pay attention to Fitoverm. He established himself on the positive side and became an indispensable assistant to gardeners and gardeners.

Characteristics of the drug Fitoverm

The drug Fitoverm is a biological pesticide aimed at protecting crops from ticks and pests.

Active substance. The main active substance is aversectin (Aversectin) - directed contact-intestinal action. Aversectin, getting into the stomach of the pest, has a neuroparalytic effect. Insects can not eat and die from this.

Compatibility. Fitoverm is not compatible with pesticides. It can not be mixed with other means to combat insects and plant diseases. If, in addition to the invasion of pests, the plant has been infected with viruses or disease spores, it is first treated with one drug (for diseases), and then sprayed with Fitoverm, or vice versa

The speed of exposure to pests. After treatment, insects become paralyzed, after 8 hours they stop feeding. They begin to die on the third day, stronger individuals can last up to 6 days.

The period of protective action. If the treatment is carried out in a protected ground (greenhouses, hotbeds, home plants), the period of protective action lasts up to 20 days.

The preparation "Fitoverm" is not absorbed by the roots and is intended only for spraying plants.

Advantages and disadvantages of the drug

The drug is a wide spectrum of action, is approved for use in household plots and for indoor plants.

Advantages of Fitoverm:

Disadvantages of Fitoverm: multiple treatments - the drug enters the pest only with food, it does not affect the laying of eggs of harmful parasites, their sleeping larvae and pupae.

Fitoverm is fatal only for adults who are able to eat on their own. As a result, double treatment is required, as new pests are formed (after 6-7 days).

Toxicity

The drug has low toxicity for humans (hazard group III) and medium toxicity for bees and beneficial insects (hazard group II), release bees one day after treatment. Dangerous to fish, do not pour unused solution into water.

An effective drug, a spark of double effect and its instructions for use, in detail here.

How to prepare the solution

A small amount of water is poured into a special container or into a sprayer.

Follow the directions for use clearly. The solution is prepared before processing and used in full.

Instructions for use

For lovers of indoor plants, Fitoverm is a real find. It does not have a pungent smell, the manufacturer took care of convenient packaging (two ampoules of 2 ml in one package), they can be processed at any time of the year.

Orchids Overseas beauty settles more and more actively on the windowsills of our apartments, and pests can increasingly be found on its leaves and roots.

Orchid is susceptible to a number of parasites, thrips, nematodes, ticks, podura (noghvostiki), mealybugs, scale insects have chosen it. “Fitoverm” is bred for orchids at the rate of 2 ml per 50 ml of water.

If the parasites settled in the roots. A flower with a pot is immersed in warm water for 20 minutes. All adults will emerge, they must be collected and destroyed. Then the plant is dried, pulled out of the pot and the roots are treated with a fitotherm.

When the leaves are affected, the leaves and stem are sprayed with the product. For a week, the plant is washed daily with running warm water. After 7 days, the treatment is repeated.

Violets, like other indoor flowers, are affected by a spider mite, thrips, whitefly. When spraying, it is advisable not to get on the flowers, they deteriorate from this. The treatment is repeated after 7-10 days.

Use Precautions

To “Fitoverm” was not dangerous, you need to know how to properly breed and use it:

1. For breeding we use a special container.
2. If a small amount of the drug is needed for dilution, open the ampoule and place the contents in a medical syringe. So it is easier to dose and store.
3. When processing plants in the open ground we use personal protective equipment, at home we use gloves and a mask.
4. After processing, we rinse the tools well and remove them for storage in specially designated places.
5. If the drug gets on the skin or in the eyes, we immediately stop work and wash our eyes with running water, skin with detergents.
6. During work, do not eat or drink anything.

After processing the domestic plants, the used ampoules and packaging from the Fitoverm preparation are disposed of, having previously been wrapped in a plastic bag. The remaining solution and water from washing containers are poured into the toilet.

Storage

The drug is stored separately from food and medicine, at a temperature of -20 to +30 degrees. Shelf life 2 years from the date of production.

Reviews about the drug

Lana. Marigold planted, grew well, but noticed light spots, as if someone had eaten the surface, dots appeared on the back side. They told me that these were thrips and advised me to buy a pesticide.

Alexander. Processed plants, there is no smell at all. I thought a fake, but then I found out that Fitoverm had no pungent odor.

Irina. She brought a mint bush from the cottage and planted it in a pot. A few days later she noticed that she brought not only mint, but also a spider mite. I wanted to throw out the mint, but it was too late; three flowers were also infected. Processed by Fitoverm, three days later returned everyone to the windowsill. The tick died. Mint managed to give new sprouts.

Fitoverm for indoor plants: instructions for use

Recently, a growing variety of chemicals have been used in gardening to control pests, but they are not always suitable, especially for treating indoor plants.

Before you start using this product, you need to carefully read the instructions, which indicate that the basis of the drug are the vital products of precisely soil microorganisms.

Fitoverm exerts a fairly wide spectrum of action, and due to its unique structure, it will quickly decay not only in water, but also in the ground.

With its help, you can get rid of various diseases and pests, including aphids, moths, etc. Use this tool must be strictly following the instructions, especially for the treatment of indoor plants without serious consequences.

To process indoor flowers, you must use a spray gun. Pests cease to feed on the plant after 8 hours, after spraying, and their complete destruction will occur after about a few days.

After a week, the maximum result will be noticeable, and the duration of the phytoerm lasts about 3 weeks. Spraying plants from the spray gun will slightly reduce the effect of the drug.

Instructions for use

It is recommended to use this tool as soon as the first symptoms of pests begin to appear. However, you should not expect that the result will be obtained instantly, since for several hours the pests continue to feed on the flower, and after a few days they will completely die.

Even despite the fact that these drugs are natural, the use of phytoerm must be carried out strictly according to the instructions and the product is diluted immediately before its use.

Using the drug, the following rules must be observed:

To dilute the drug for spraying, you need to take an ampoule with a fitoverm and dilute it with water (indicated in the instructions). In this solution, leaves of domestic plants are well wetted. It is necessary to perform 4 treatments, while a short break is made between each (approximately 7-9 days).

Given the type of plant pests, the ampoule should be diluted in the following proportions:

• thrips - per 500 ml of water 1 ampoule;
• aphids - per 600 ml of water 1 ampoule;
• spider mite - per 2500 ml of water 1 ampoule.

How to apply the tool for orchids?

Orchids very often suffer from various types of pests, and so that the plant is not used to combat them, it is recommended to use this drug.

To achieve maximum results, not only orchid leaves are processed, but also the soil in the pot.

For the treatment of violets

If there is a need to perform the processing of violets, the drug should be done in the ratio of 1 ampoule of the drug per 1 liter of water. Experienced gardeners advise in the finished product to add just a couple of drops of a simple animal shampoo that contains permethrin.

For the complete destruction of pests, indoor plants are treated 4 times, with a 3-day break between each procedure.

Regardless of which particular indoor plant will be treated with a phytoderm, it is necessary to carefully spray or wipe all the leaves, both from above and from below.

This procedure must be carried out in a room with a temperature of at least +20 degrees. If the procedure is carried out directly during the flowering period, the flowers should also be processed.

Fitoverm

Fitoverm is an insectoacaricide, in terms of spectrum of action it is similar to Akarin (Agravertin). It is used as a means of combating gnawing and sucking plant pests.

Compatibility with other pesticides: Do not mix with other drugs.

Protective period

The drug protects plants in closed ground 7-20 days after treatment; on open ground crops (in the absence of precipitation within 6 hours after treatment) 7-20 days depending on the dose and type of pests. Not phytotoxic in recommended rates.

Precautionary measures

Hazard Class - III. Do not use food utensils to prepare the solution. Working solution is not subject to storage.

Processing is carried out in the absence of children and animals. After work, wash your face and hands with soap and rinse your mouth with water.

Rinse the containers used for the preparation of the solution, as well as the sprayer parts, with plenty of water. Moderately toxic to bees and other pollinating insects, toxic to fish.

Mode of application

The drug should be diluted first in a small amount of water, then with continuous stirring add the remaining water.Spray the plants with a freshly prepared solution in dry, calm weather, preferably in the morning (up to 10 hours) or in the evening (18-22 hours), evenly moistening the leaves, 4-6 hours before rain.

The optimum temperature during processing is 12-25 ° C. Do not spray the product against the wind.

Potato: Colorado potato beetle 1 ml / 1 liter of water. Spraying during the growing season with an interval of 20 days. The flow rate of the working fluid is 5 l / 100 sq.m. Processing is carried out 1-3 times with an interval of one day.

Cabbage: cabbage and turnip whites, cabbage scoop - 4 ml / 1 liter of water. Spraying during the growing season. The consumption of the solution is 4 l / 100 sq.m. Processing is carried out 1-2 times with an interval of two days.

Currant: spider mite - 2 ml / 1 liter of water; moths, leafworms - 1.5 ml / 1 liter of water. Spraying during the growing season. The consumption of the solution is 1 liter per bush. Processing is carried out 2 times with an interval of two days.

Apple tree: spider web and red fruit tick, leaf moths, moths - 1.5 ml / 1 liter of water (treatment is carried out 2 times with an interval of two days); apple moth, scoops - 2 ml / 1 liter of water (treatment is carried out 1 time). Spraying during the growing season. Consumption of 2-4 liters per young tree, 5-8 liters per adult.

Cucumbers, peppers, eggplant, tomatoes of the protected ground: spider mite - 1 ml / 1 liter of water (spraying during the growing season with an interval of 20 days, waiting time 3 days, multiplicity - 2 times); peach and melon aphids - 4-6 ml / 1 liter of water (spraying during the growing season with an interval of 15 days, waiting time 2 days, multiplicity - 2-3 times); thrips - 10 ml / 1 liter of water (spraying during the growing season with an interval of 20 days, the waiting time is 2 days, the multiplicity is 2-3 times). The flow rate of the solution is 10 l / 100 sq.m.

The drug Fitoverm for indoor plants: instructions for use

It is quite in demand among buyers, because it has a lot of advantages over other insect repellents. With it, you can provide complete care for your plants.

Description of the drug

Chemicals are often used to process indoor flowers. However, you need to be careful with them. In addition, not all drugs from those that you, perhaps, are used in vegetable gardens or orchards, are suitable for plants flowering in an enclosed space.

A fairly effective drug is phytoverm. It includes two main types of poisons:

• contact - an insect dies from poison on its body immediately after treatment;
• intestinal - the result is also very fast, but such poison acts in a slightly different way, destroying the parasite from the inside, that is, penetrating into its body.

At home, with the help of the drug Fitoverm, you can conduct an effective fight against many pests. This group includes aphids, moths, leafworms, moths, plant mites, thrips, caterpillars, Colorado potato beetles, as well as cabbage scoop and whitewash.

You can buy the product in packages of 2-4 grams. The required amount of the drug will depend on the plant that you have to process and, accordingly, on the type of insects and the degree of infection of the indoor flower by them.

Instructions for use

Before proceeding with the processing of domestic plants, it is worthwhile to carefully study the instructions for the use of phytoerm: only there you can be sure that you will not harm the flower while ridding it of insects.

Do not wait for an instant result, for several hours after applying the drug to the plant, pests will actively feed on it.

However, the very next day you will notice that the parasites have become smaller, and after a few days they will completely disappear from the flower pot. The drug is diluted with water in certain proportions, and then the leaves of the plants are moistened in it.

A similar procedure is carried out about 4 times, with a break of one week between stages.

"Fitoverm" for orchids. An emulsion, which contains potent poisons, is unlikely to be the optimal solution if orchid flowers are infected (most of them thrips live in plant inflorescences).

But in the case when the stems and petals, for example, from ticks (and this is fraught with other plant diseases), you can not do without the use of phytoerm. Be extremely careful, the procedure for treating orchids must be carried out strictly in stages:

1. First of all, you need to get the flower out of the pot, and after that the container itself should be thoroughly disinfected. If possible, use a new pot at all, so you will be sure that re-infection due to the remaining parasites will not occur;
2. the root system is completely cleaned of the substrate, after which it is carefully soaked in a container with diluted phytoverm at the rate of 1 g per 1 liter;
3. when processing is complete, the flower must be laid out in a wide bowl so that sunlight falls on it. First, cover the orchid roots with a plastic bag, and after a day, it can be removed. While the plant is still lacking in substrate, moisten the roots daily;
4. after 10 days, the procedure is duplicated, but after that the flower is immediately planted back in the pot.

You will need to treat the orchid for plant mites two more times, however, do not apply the drug to the leaves, it is better to immediately add it to the soil.

"Fitoverm" for violets. As for the treatment for parasites of violets, the procedure here is not so long, and in addition, the break between treatment periods is about 3 days.

The procedure itself is similar to the method of eliminating parasites on orchids - a four-time treatment with a break. Why is it impossible to achieve the desired result after a single application? The thing is that the therapeutic composition is designed to remove adult parasites, and not their eggs or larvae.

Therefore, in a few days between the processing steps, new insects will appear, which will soon be destroyed. Thus, the repeated extermination of pests is necessary for the full effect.

Fitoverm for seedlings. Instructions for the use of the drug for seedlings are akin to recommendations for the treatment of indoor plants.

In this situation, you need to apply the product both on the leaves and on the soil itself. The effect will be much more noticeable if you carry out the procedure in a room with a temperature of at least 18 degrees.

Pros and cons of the drug

Plants treated with phytoverm quickly return to normal and get rid of pests. It's all about using a truly effective drug. Fitoverm has a lot of advantages over similar formulations:

There are many points that can adversely affect the quality of the solution:

Despite the shortcomings, the tool has gained wide popularity among flower growers, since with it you can get rid of pests quite effectively.

Pest exposure rate

After 6 hours after applying the product, gnawing insects stop eating and for some time do not move at all. Then they die. As for sucking pests, the duration of the drug can last up to 12 hours.

You will need about a week to completely get rid of parasites. In this case, the leaves will remain deadly for them for another 3 weeks.

Precautionary measures

Fitoverm is a natural preparation, but this does not mean that precautionary measures can be forgotten. There are several recommendations that must be followed:

1. To dilute the product, select a container that you will not use in the kitchen afterwards (wash dishes or vegetables in it);
2. After completing the procedure, wash your hands thoroughly with soap or some detergent;
3. The poison container should either be discarded after processing the plants, or washed and left in the pantry or in some inaccessible place for the next treatment of indoor flowers.

Adhere to key rules, and you will not only be able to achieve high results, but also do no harm to yourself or directly to indoor flowers.

Storage conditions

If you have already cured your home flowers from gnawing insects, but a few packages with the drug remain, ensure their proper storage. It is necessary to preserve the composition at a temperature of -15-30 degrees.

The drug will retain its characteristic features for 2 years, however it is advisable to leave it in a dark, cool place. Do not leave medicines and especially products near the phytoverm.

If you still have a small amount of water diluted with water, it will most likely lose its properties the next day.

The use of phytoerm for indoor plants

It is both an insecticide and acaricide. They are treated with plants when pests are detected. The substance is produced by soil microorganisms.

At present, Fitoverm-M has been invented; it affects thrips much better than just Fitoverm. There is also Fitoverm for flowers.

Advantages:

1. The drug decomposes 24 hours after application.
2. Pests do not get used to the tool.

Disadvantages:

In which case is it used?

Fitoverm is a biologically active drug that destroys common and red spider mites, aphids, thrips, leaf-eating caterpillars.

All compounds that destroy harmful insects are divided into 2 groups:

• contact;
• intestinal.

Contact fall on the cover of pests and destroy them, and intestinal - in the intestines of insects, they eliminate the pests only after 3-4 days. Fitoverm has a double effect, it is both contact and intestinal.

How to apply - step by step instructions

To get the Fitoverm working solution, you need to dilute 1 ampoule (5 ml) in water. Read the instructions carefully.

To destroy pests of indoor plants, treatment is done 4 times, between the treatments, an interval of 7-10 days is observed:

After preparing the solution, it must be applied immediately.

Use any sprayer that sprays. Indoor flowers are moistened evenly, since the poison begins to act only after pests get on the skin, as soon as they eat leaves that are saturated with poison.

What plants are used for?

Fitoverm can be used to destroy pests on any indoor plants: hibiscus, calathe and so on, but there are some features.

All leaves must be carefully sprayed. The room temperature should be approximately 20 ° C.

Fitoverm for orchids. To eliminate harmful insects that destroy orchids, you need to dilute 1 ampoule in 0.5 liters of clean water. It is also necessary to process 4 times, as the larvae are not affected by the substance. In addition, you need to spill the product in pots.

To get rid of ticks, you need to remove the orchid from the pot, and thoroughly rinse or destroy the pot. An orchid can calmly lie without a bark for a week. Because of this, roots are washed with hot water, then treated with Fitoverm, dissolved 1 mg per 1 liter of water, and put the orchid in a polyethylene bag for 24 hours.

For roses. To spray roses, it is necessary to mix Fitoverm and Silver Gold, since the leaves of the roses are protected by a layer of wax, while pesticides penetrate the leaves with great difficulty. Also, the leaves of many plants are very pubescent, therefore, to destroy the pests they need to use this mixture.

On roses, Fitoverm can still be mixed with Rapsol, but it is necessary that Rapsol has a small concentration of 0.3%, otherwise burns may appear on the surface of the rose leaves.

Impact Speed ​​and Compatibility

Fitoverm is compatible with:

• growth regulators (Ribav-Extra, Zircon, Epin);
• organophosphorus insecticides;
• the main pesticides that are used to process indoor flowers;
• with pyrethroids;
• fertilizers;
• fungicides.

But it is forbidden to mix with substances that have alkaline properties. If you mixed any drug and Fitoverm, and the resulting composition precipitated, then these substances can not be combined.

6 hours after the use of the drug, gnawing insect pests do not eat and freeze for 2-3 days. And after they die.

Sucking insects need more days. They stop eating after 12 hours, and die after 2 days. Their bulk dies in 5-7 days. And the leaves of flowers retain the poison 1-3 weeks. According to experiments, the worst effect of the drug is on aphids.

The composition of the drug

The main substance in the preparation is Aversectin. It acts on harmful insects, it is obtained from the fungus Streptomycesesavermitis, which is located in the ground.

It stops nerve impulses that enable insects to feed, so the pests do not move, stop eating and die of hunger.

Precautions for use and storage

It is moderately hazardous for bees and fish, when plants bloom, it is forbidden to spray them with a product. The substance must not be allowed to enter water bodies. It has a 3 hazard class in relation to humans and animals.

People who use the drug may show allergies. Because of this, it is used, observing safety precautions, wearing a dressing gown, gloves, glasses, a respirator.

When processing plants, you can not eat, drink, smoke. After spraying, thoroughly wash your hands and face with soapy water, rinse your mouth.

The bag remaining from the drug is burned, trying not to inhale the smoke. Do not throw the bag into the water.

Estimated cost of the Fitoverma package (4 mg) is 16-18 rubles.

Real reviews

MaritJohansen, Russia, Moscow. Fitoverm erodes in the air and destroys pests for 3-4 hours. This is enough to eliminate adult insects. At 20 ° C, plants are treated once a week, and so on 3-4 times.

At 30 ° C - after 3-4 days. I pour an ampoule into a 0.5 liter bottle. After covering with a bag, leave for 24 hours. As a result, all harmful insects died.

Malinkina, Belarus, Mogilev. Fitoverm - an effective drug, as a rule, I processed 2 times after 7 days.

The drug has destroyed pests on roses and gardenia. After spraying with the product, I sprayed the plants with Epin. All the flowers recovered.

Instructions for use Fitoverm for indoor plants

In order for indoor plants to please their beauty, people must take care of their health. The drug Fitoverm is intended for the treatment of leaves and flowers on which pests have appeared.

These are effective insecticide and acaricidal products that are suitable for use in open and closed soil types. Already, many people have been able to appreciate all the benefits of this tool.

Features of the tool

Fitoverm is a modern insect acaricide, which has a contact-intestinal spectrum of action. It is thanks to this that the tool can be used against various types of insects and ticks. The active substance after treatment quickly penetrates through the skin of insects and into the gastrointestinal tract when eating leaves.

The main active ingredient is Aversectin C, which causes paralysis in animals. After using this product, pests lose their ability to eat 7-8 hours after treatment. And in two days they perish.

Fitoverm insecticide decomposes inside the soil a month after treatment, and on the surface of plants three days later. This drug can be used even during flowering plants.

It is important to note that due to the rapid destruction of the main component, plants need to be sprayed as necessary. After the first treatment, only adults die, but the larvae, nymphs and pupae will remain on the leaves.

When they begin to eat on their own, you will need to re-spray. Such a tool is often bought for treatment against whiteflies, ticks, aphids and other pests.

During treatment, people need to follow basic safety rules - avoid contact with skin and mucous membranes. Before use, it is important to read the instructions and familiarize yourself with the dosage of the drug.

The scope of the drug

Fitoverm is a drug with a pronounced smell, which is used for different purposes. It can be used not only to protect indoor plants, but also different crops. Fitoverm effectively copes with the following pests:

Everyone should remember that some insects and pests get used to the components of the drug, so its effectiveness with prolonged use may decrease.

How to handle crops and plants?

Prepare a working solution before processing the crops. Dilute the drug in a bowl that is not intended for cooking. After use, thoroughly wash the container. Experts recommend using disposable tableware and choosing the right weather for spraying.

It is best to spray plants with a spray gun. During operation, it is necessary to control the uniform distribution of the product. Such treatment can be carried out on abundantly vegetative plants.

The leaves of indoor plants should be thoroughly wiped with the prepared solution on each side. If the product is not fully used up, then the residues can be poured onto the soil in a pot.

This is due to the fact that when spraying the solution indoors, fumes or sprays can get into the lungs. Use Fitoverm at least four times, with a break of 7-8 days.

Precautionary measures

Each person when working with this drug should follow several important recommendations. Spray plants need special equipment. The worker needs to wear glasses to protect the eyeball, a mask, gloves and clothing that covers the body. After completing the procedure, it is important to wash your hands and face thoroughly with soap and take a shower.

When the poison enters the gastrointestinal tract, you need to take activated charcoal at the rate of one tablet per 10 kg of body weight. If possible, it is necessary to induce vomiting and undergo examination by the attending physician.

You need to store the drug in places where small children and pets cannot reach. Food and medicine should not be near. The optimal storage temperature is from -10 to +32 degrees Celsius.

Shelf life is no more than two years in tightly closed packaging. If the solution was not completely consumed during spraying, then its residues must be disposed of.

Advantages and disadvantages of the drug

The main advantage of Fitoverm is its low risk to humans. The following advantages can be distinguished:

After spraying, you can eat fruits and vegetables after 4 days. That is why many people use this tool to process tomatoes, radishes, cucumbers, green crops, early and cauliflower, peppers.

Fitoverm effectively copes with the destruction of insects that gnaw leaves. These include codling moths, scoops, leafworms, whites, moths, aphids, thrips, and a spider mite.

This tool has several disadvantages:

1. frequent and thorough processing should be carried out;
2. low efficiency in rainy weather;
3. It is forbidden to mix Fitoverm with other drugs;
4. insufficient wetting of the surface of flowers and leaves;
5. high cost of funds.

To leaves and flowers well wetted by an insecticide, experts recommend mixing it with soap suds, shampoo or other detergent.

How to properly breed and consumption rates, reviews and applications

To dilute the drug, take a bucket with a capacity of 10 liters, pour half the water and pour the Fitoverm ampoule. The solution must be thoroughly mixed and add water to the required volume. When processing indoor plants, the following rules must be observed:

If pests reappear or show signs of life after spraying, then the drug must be changed. It is important to note that each ampule contains detailed instructions for dilution and use of the drug.

Recommended dosages for dilution were obtained empirically, so you should strictly adhere to these recommendations.

Manufacturers also took care of convenient packaging - these are single ampoules with a volume of 2 ml. They are suitable for processing at any time of the year.

Spraying orchids

This is a unique plant, which is famous for its beauty and unusualness. Most often, the flower is located on the windowsills, and pests actively settle on the roots and leaves. An orchid must be treated for thrips, nematodes, ticks, mealybugs, and also insects. To obtain the finished solution, take 2 ml of the product and 50 ml of water.

There are situations when pests settle in the root, therefore, to destroy them, a flower with a pot is immersed in water at room temperature for 30 minutes.

If pests live on the leaves and stems of orchids, then they need to be washed every day for a week with the prepared solution. When re-infected with pests, the treatment is repeated.

Fitoverm for violets

Violets are beautiful plants that delight people with their lush flowers. On their leaves, pests reproduce imperceptibly, because they reliably hide inside outlets.

On violets, a spider mite, thrips and whitefly multiplies. During processing, you must avoid getting the solution on the flowers so as not to spoil them.

Fan reviews

Lyudmila.I live in a private house and grow flowers, plants and trees. I have repeatedly had to do treatment to kill pests. Recently I bought Fitoverm on the advice of my neighbor and was pleasantly surprised by the result.

Now I recommend that other people buy this tool for their garden and home. It is convenient for them to process crops, whiteflies and ticks, good composition and minimum consumption are quickly destroyed.

Konstantin. If you are looking for an effective drug for treating home plants or trees in the garden, be sure to buy Fitoverm.I never write reviews, but I would like to write a few lines about this tool.

In our family everyone loves to eat vegetables and grow cultivated plants on the windowsill. But even at home, pests and insects appear on the leaves. We tried many different drugs and biological poisons, but only Fitoverm helps us get a good harvest.

Dmitry. I have long been using the Fitoverm drug against spider mites and whiteflies, so I want to share my review. This is a miracle tool that always pleases with its effectiveness. Individuals die completely after 3 days. This result did not give any other tool that I was recommended in stores.